Need help?Do you have a question about the Intertek PH01-SSB/HL2021A and is the answer not in the manual?
General| Brand | Intertek |
|---|---|
| Model | PH01-SSB/HL2021A |
| Category | Patio Heater |
| Language | English |
Explains DANGER, WARNING, and CAUTION symbols and their associated risks.
Highlights specific warnings like outdoor use, improper installation, and severe hazard risks.
Details explosion, fire, and carbon monoxide risks, emphasizing ventilation and clearances.
Covers gas leak response, safe service practices, and burn hazard warnings, including child safety.
Lists and illustrates all parts included in the package for assembly.
Introduces the installation process and begins with attaching the wheel assembly to the base.
Details the steps for attaching the wheel assembly to the heater base.
Explains how to attach ground fixtures to the base, including options for preassembled or no water tank models.
Guides on how to attach the post to the top of the cylinder housing.
Covers tabletop installation and attaching reflector studs to the screen cover.
Details the process of attaching the head assembly to the post.
Provides instructions for installing the reflector panels and center plate.
Explains how to connect the hose and regulator to the propane cylinder, including specifications.
Covers gas supply pressure, BTU requirements, and cylinder specifications before leak testing.
Outlines essential safety measures to be followed during the leak detection process.
Provides step-by-step instructions for applying leak solution and identifying leaks.
Details Carbon Monoxide and Explosion/Fire hazards, reiterating outdoor use and clearance requirements.
Lists essential checks before turning gas on and before lighting, including inspection and purging.
Explains the pilot light system and the initial steps for safe ignition.
Provides detailed steps for turning on the gas, lighting the pilot, and igniting the main burner.
Offers solutions for igniter failure, pilot light issues, and notes on initial use smoke and noise.
Describes expected flame appearance and emitter screen color when the heater is on.
Details how to safely relight the pilot and shut down the heater, including cooldown warnings.
Provides a checklist of safety and operational checks before and after using the heater.
Addresses issues like pilot not lighting, burner problems, and flame characteristics with solutions.
Provides guidance on cleaning exterior surfaces, ensuring airflow, and checking for blockages.
Provides instructions for storing the heater between uses and during extended periods of inactivity.
States that repairs should only be done by qualified personnel and advises allowing the heater to cool before service.
To Next Page