How to fix leaking between spa tub and control unit connectors in Intex Bathtubs?
If you notice leaking between the spa tub and control unit connectors of your Intex Bathtubs, tighten the inlet and outlet connections. Coat the o-ring with petroleum jelly for a waterproof seal. Use a screwdriver to remove the grid from inside the spa, ensuring the inlet/outlet O-ring is in place, clean, and undamaged.
How to level pump connectors with spa connectors in Intex 28429 Bathtubs?
If the pump connectors of your Intex Bathtubs are not level with the spa connectors, elevate the pump with wood or another type of insulated material to align the pump’s connectors with the spa’s connectors.
Why does my Intex Bathtubs have a strange shape?
If your Intex Bathtubs tub has a strange shape, avoid exposing the spa to direct sunlight for extended periods. Check the air pressure and release air if necessary, especially during hot weather, to prevent damage to the tub.
Detailed guide on inflating the spa tub wall and cover air bladder using the provided hose and air blower.
Explanation of the spa's control panel features, including buttons, LED display, and their operational functions.
Information on ideal water chemistry parameters (pH, alkalinity, chlorine) and methods for testing and achieving balance.
Guides on adjusting total alkalinity, pH, and calcium hardness levels in spa water to maintain optimal chemical balance.
Troubleshooting steps for problems with the spa's heater, filtration pump, or bubble air blower functionality.
General| Capacity | 4 people |
|---|---|
| Water capacity | 210 gallons |
| Heating capability | Yes |
| Maximum temperature | 104°F |
| Massage function | Yes |
| Number of air jets | 120 |
| Built-in hard water system | Yes |
| Filtration pump | Yes |
| Air Blower | Yes |
| Shape | Round |
| Height | 28 inches |
| Type | Inflatable |
| Voltage | 110V |
To Next Page
