How to fix leaking between spa tub and control unit connectors in Intex 28431?
If you notice leaking between the spa tub and control unit connectors of your Intex Bathtubs, tighten the inlet and outlet connections. Coat the o-ring with petroleum jelly for a waterproof seal. Use a screwdriver to remove the grid from inside the spa, ensuring the inlet/outlet O-ring is in place, clean, and undamaged.
How to level pump connectors with spa connectors in Intex 28431 Bathtubs?
If the pump connectors of your Intex Bathtubs are not level with the spa connectors, elevate the pump with wood or another type of insulated material to align the pump’s connectors with the spa’s connectors.
Why does my Intex 28431 Bathtubs have a strange shape?
If your Intex Bathtubs tub has a strange shape, avoid exposing the spa to direct sunlight for extended periods. Check the air pressure and release air if necessary, especially during hot weather, to prevent damage to the tub.
Essential safety guidelines for preventing drowning, injury, and misuse.
Warnings and requirements for electrical safety, including GFCI/RCD usage.
Precautions on water temperature, health conditions, and medication use.
Guidelines for selecting a level, stable location with adequate drainage.
Explanation of buttons, LED display, and basic spa controls.
A guide to understanding error codes displayed on the LED and their solutions.
A comprehensive guide to diagnosing and resolving common operational problems.
To Next Page
General