Intex WL698 - User Manual

9 pages

To Next Page

To Next Page

Loading...

155A

(155IO) POOL LIGHT ENGLISH 7.5” X 9.25” PANTONE 295U 06/18/2019

English

OWNER’S MANUAL

LED Pool-Wall Light

Model

WL698

220 – 240 Volt ~, 50 Hz

Emitter: IP66, Receiver: IP68 ( )

IMPORTANT

SAFETY RULES

Please read, understand, and follow

all instructions carefully before

installing and using this product.

Don’t forget to try these other ne Intex products: pools, pool accessories,

inatable pools and in-home toys, airbeds and boats available at ne

retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves the right

to change specications and appearance, which may result in updates to the

instruction manual without notice

For illustrative purposes only.

©2019

Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation

Corp.

All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen

Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong

Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

• Distributed in the European Union by/Distribué

dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading

B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

1.2 m

155-*A*- R0-2006

Table of Contents

Questions and Answers:

J
James WilliamsAug 2, 2025
What to do if my Intex Swimming Pool Lighting doesn't light up?
- A
  Adam ReedAug 2, 2025
  If your Intex LED pool wall light isn't lighting up, here's what you can check: * Ensure the power cord is securely plugged into the electrical outlet and that the intermediate connection between the transmitter and the transformer is tightened. * Also, make sure the orientation and alignment between the pool light and the transmitter are correct. Refer to the setup instructions for guidance.
K
Kayla BrownAug 16, 2025
Why is it difficult to align my Intex WL698 Swimming Pool Lighting?
- C
  Christopher HudsonAug 16, 2025
  It may be difficult to align the Intex pool light and the transmitter because of wrong orientation; the magnetic poles may not be aligned correctly. Rearrange the orientation of the pool light and the transmitter. See the setup instructions for further assistance.

Intex WL698 Specifications

General

Brand	Intex
Model	WL698
Category	Swimming Pool Lighting
Language	English

Summary

IMPORTANT SAFETY RULES

Safety Precautions

Key safety precautions and warnings for product installation and use.

PARTS REFERENCES

Product Component Identification

Identification and listing of all product parts with reference numbers.

SETUP INSTRUCTIONS

Installation Procedure

Step-by-step guide for setting up the LED pool light.

LONG TERM STORAGE

Storage and Cleaning Guidelines

Procedures for cleaning and storing the product to prevent damage.

OPERATION INSTRUCTIONS

Left Button Operation

Controls for turning the light ON/OFF and setting the light mode.

Right Button Operation

Controls for turning the transmitter ON/OFF and setting the light mode.

TROUBLE SHOOTING GUIDE

Problem Resolution

Table detailing common issues, their causes, and solutions.

GENERAL AQUATIC SAFETY

Water Safety Best Practices

General guidelines and recommendations for safe water recreation.

LIMITED WARRANTY

Warranty Coverage Details

Information on warranty period, exclusions, and claim procedures.