EN-13
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1.
Press the MODE button, and set the camera
mode to [ ] or [ ]; or press the 7
button
.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
c / d buttons, and press the SET button.
4. Select [Language] with the
c
/
d
buttons and press
the SET button
.
5. Select the displayed language with the e / f / c
/ d buttons and press the SET button.
The setting will be stored.
6. To exit from the [Setup] menu, press the MENU button.
Formatting the Memory Card or Internal Memory
This utility formats the memory card (or internal memory) and erases all stored images
and data.
1. Press the MODE button, and set the camera
mode to [ ] or [ ]; or press the 7
button
.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with
the c / d buttons, and press the SET button.
4. Select [Format] with the
c
/
d
buttons, then
press
the SET button
.
5. Select [Execute] with the
e / f
buttons, and
press
the SET button
.
To cancel formatting, select [Cancel] and
press
the SET button
.
6. To exit from the [Setup] menu, press the MENU
button.
;;
;;
;;
To Next Page
Loading...
Need help?
General
