intrepid 4x5 - Setting up

6
7
Packing away
2 Unscrew front standard
from base.
3 Loosen all front standard
movement controls.
4 Push the front standard
down as far as it will go.
6 Hold front and rear
standards together, then
gently fold them down.
5 Loosen rear standard
screws on each side.
7 Tighten rear standard
controls to lock camera flat.
1 Remove lens and any
other accessories.
QUICK TIPS:
• Steps 4 and 6 are very
important to preserve the
shape of your bellows
• Don’t force anything!
• Go to page 8 for more
troubleshooting advice
• Always remove your lens
before folding down