Why do the front wheels wobble on my Invacare Alu Lite Wheelchair when moving fast?
If the front wheels wobble when moving fast on your Invacare Wheelchair, it could be due to too little tension in the front wheel bearing block. Try tightening the nut on the bearing block axle slightly. Alternatively, the front wheel may have worn smooth, in which case you should change the front wheel.
What to do if the brakes are gripping poorly on my Invacare Wheelchair?
If the brakes on your Invacare Wheelchair are gripping poorly or asymmetrically, the brake setting may be incorrect. Correct the brake setting.
How to fix an Invacare Alu Lite that does not travel in a straight line?
If your Invacare Wheelchair doesn't travel in a straight line, the front wheel bearings may be dirty or damaged. Clean or replace the bearings.
Why is the front wheel stiff or stuck on my Invacare Alu Lite?
If the front wheel of your Invacare Wheelchair is stiff or stuck, it could be that the bearings are dirty or faulty. Clean or replace the bearings.
Why is the rolling resistance very high on my Invacare Alu Lite Wheelchair?
If the rolling resistance is very high on your Invacare Wheelchair, it might be because the rear wheels are not parallel. Ensure the rear wheels are parallel.
General| Foldable | Yes |
|---|---|
| Seat Width | 40 cm, 50 cm |
| Seat Depth | 42 cm |
| Frame Material | Aluminum |
| Armrest Height | 22 cm |
| Legrest Type | Swing-away |
| Wheel Size | 24 inch |
| Front Casters | 8 inch |
To Next Page
