34
8. Reinstall the front shroud onto the wheelchair. Refer
to
REMOVING/INSTALLING FRONT SHROUD in this
procedure of the manual.
FIGURE 1 - REMOVING/INSTALLING SHROUDS - MWD WHEELCHAIRS
Front Shroud
1/4-Turn Bolts
Phillips Screws
Washers
Rear Storage
Compartment
Rear Shroud
Side Shroud
Side Shroud
Phillips Bolts
Locknut
Wheelchair
Frame
WHEELCHAIRS NOT EQUIPPED WITH WEIGHT SHIFT BASIC TILT
WHEELCHAIRS EQUIPPED WITH WEIGHT SHIFT BASIC TILT
Front Shroud
1/4-Turn Bolts
Phillips Screws
Washers
Side Shroud
Side Shroud
Phillips Bolts
Locknut
Wheelchair
Frame
Rear Shroud
C. WEIGHT SHIFT TILT MODELS - Proceed to
STEP 7.
7. Reinstall the rear shroud and rear storage compart-
ment (if equipped) onto the wheelchair. Refer to
RE-
MOVING/INSTALLING REAR SHROUD AND REAR
STORAGE COMPARTMENT in this procedure of the
manual.
S
H
R
O
U
D
S
SHROUDSPROCEDURE 10
To Next Page
Loading...
