53
Switching on/o
1. Switching on:
a. Press and hold the start-release button (1).
b) Press and hold either trigger switch (6 or 7).
c) Once the motor is running, you can release the button (1). The machine will
continue working while at least one trigger button is held.
NOTE : Do not start the motor on tall grass. It may lock the blade
and damage the motor.
Switching o:
Release both trigger buttons to switch the product o.
NOTE: The cutting device will continue to rotate for a short
period after the product has been switched o.
WARNING! To ensure safe operation the height adjustment
of the handle is limited by the toothed area. To not attempt
changing the height outside this range!
75 mm
25 mm
1
2
I
O
To Next Page
Loading...
