The exact time needed to dry clothes depend on many
factors, the room's temperature, the humidity level, the
moisture of the clothes etc., so there is no standard time
since of these variable factors mentioned above.
When the dehumidier reaches its set point it will continue
operating until humidity level reaches the desired setting with
a tolerance of 3%, then the compressor will stop operating
and soon after the fan will stop operating also.
The dehumidier operates by intaking condensed air
removing any moisture and sending it back in the area it
operates. If you are standing near the dehumidier while
operating you may feel that the air coming out of the fan is
cooler due to the diusion. In reality, it is at the same room-
temperature but with less humidity.
l Make sure the dehumidier’s plug is placed completely into the socket.
l Check the house fuse/circuit breaker box.
l Check whether the power cord is damaged.
l Check the water tank, if it is full, empty it.
l Check if the dehumidier has reached its preset level.
l Make sure the water tank is positioned properly.
l Room temperature is lower or higher than the advised operational range.
l Check whether the humidity level has been set in high levels.
l Make sure that the dehumidifier has been operating enough time to remove the
moisture.
l Make sure there are no curtains, blinds or furniture blocking the front or back of the
dehumidier.
l The humidity selector may not be set low enough.
l Make sure you have cleaned the lter as suggested. Clogged lter may result in reduced
performance.
l All house exits (windows doors etc) where the dehumidier is operating, should be
shut.
l Room temperature is below the advised operational range.
l There is a kerosene heater or something giving o water vapor in the room.
l The room that the device is placed is bigger than suggested.
l The humidity level is too high.
To Next Page
Loading...
Need help?
General
