7ΕΝ
Remember to always disconnect the appliance from the main
power socket before any assembling or disassembling.
Hose
1. To t the hose, push it rmly into the hose socket on the front
of the appliance until the hose clicks
into place.
2. To remove the hose, press the
release button on the hose end and
pull the hose out of the appliance.
Connecting Tubes and Accessories
1. Attach the larger end of the tube to the hose handle.
2. Adjust the tubes to your desired length.
• Push forward the switch on the tube then adjust. Release the
switch until the desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and/or the accessories, rmly hold each
piece and pull apart.
ASSEMBLY
To Next Page
Loading...
Need help?
General