7
Replacing the Filter
1. Replacing the lter
Filters are a consumable product and may have different life cycles. It is highly
recommended to replace the lter regularly to achieve the best ltration affects.
2. The lter is not a reusable product. It must be replaced.
3. To avoid using the wrong lter, it is recommended to purchase replacement lters from the
dealer.
4. Please refer to the steps listed in the “Installation Method” of this manual.
Troubleshooting Tips
Before calling for service, review the chart below.
Symptom
The machine
does not run
1. The cord is not
plugged in or not
properly inserted.
2. The power switch has
not been turned on.
1. The lter has been
installed incorrectly.
2. It is time to replace the
lter.
3. Objects are blocking
the inlet.
1. Make sure the power
cord is securely and
properly inserted.
2. Press the “ON/OFF”
button on the panel.
1. Make sure the lter is
installed properly.
2. Replace the lter.
3. Remove the objects
blocking the inlet.
Poor ltration
effect
Possible Cause Possible Solution
If the following occurs, please send for repairs.
1. The above troubleshooting tips have not resolved the issue.
2. Water or objects have entered the unit.
NOTE:
All the illustrations in the manual are for explanatory purposes only. The actual
shape of the unit you purchased may vary.
The design and specications are subject to change without prior notice.
Contact your local retailer or dealer for details.
To Next Page
Loading...
Need help?
General
