Exchange of a burner nozzle
Unscrew the nozzle with a special socket spanner No 7 and replace with a new one according to a
type of gas (see gas tablel).
Caution! Adapting the appliance to a different type of gas than is indicated by the manufacturer of the cooker on the rating
label, or purchasing a cooker for a different type of gas than supplied to the house, is exclusively the responsibilty of the user
and the fitter.
In cookers with a safety device, a knob with a surface burner safety valve is used, fig. Knobs
should be adjusted with the burner switched on and set to the economical flame position, using
an adjustment screwdriver of the size 2.5 mm.
Caution! After adjustment is completed, place a label indicating the type of gas to which the cooker is now adapted.
29 • English
To Next Page
Loading...
