Inverter Fusion FUSION 151 HF User Manual

INSTRUCTION MANUAL
FUSION 151 HF Issue 02: Sept 2006
FUSION 151 PHF
FUSION 200 HF
FUSION 200 PHF
CAUTION: Ensure the operator of this equipment reads this information.
Additional copies can be obtained from your equipment supplier.
If you are not fully conversant with the principles of operation and safe working practices for
arc welding, we recommend that you read the HSE Booklet HSG204 (Health & Safety in Arc
Welding).
Do not attempt to install or operate this equipment until you have read and fully understood
the contents of this manual. If you do not fully understand any instruction, contact your
supplier for further information and advice before attempting any welding or installation
procedure.
Made in Britain
24pp A5 Instruction Manual.indd 1 28/9/06 3:33:09 pm

Inverter Fusion FUSION 151 HF Specifications

General

Welding process	MMA, TIG
Input voltage	230 V
Input frequency	50/60 Hz
Welding current TIG	5-150 A
Protection class	IP21S
Insulation class	F
Rated Input Current	16 A
Efficiency	85%