24-HOUR GMT WITH POWER RESERVE24-HOUR GMT WITH POWER RESERVE
This is an Automatic timepiece that may be equipped with a screw down crown. Please
refer to Page 1 for important details and warranty information.
1. To set the date, gently pull out the crown to the first click stop position (1) and
rotate counter clockwise to the correct date.
2. To set the time, gently pull out the crown to the second click stop position (2) and ro-
tate clockwise to the correct time. As you do this, the hand of the 24-hour GMT indicator
will rotate as well. This zone will indicate if you are setting the watch to a.m. or p.m.
3. After the date and time are set, return the crown to its normal operating position (0).
Again, if it is a screw down crown, make sure it is correctly locked back in place.
4. The power reserve display will indicate how many hours of autonomy remain before
the watch requires winding again.
2928
To Next Page
Loading...
