24-HOUR GMT WITH DAY, DATE, MONTH AND YEAR24-HOUR GMT WITH DAY, DATE, MONTH AND YEAR
This is an Automatic timepiece that may be equipped with a screw down crown. Please
refer to Page 1 for important details and warranty information.
1. To set the time, gently pull out the crown to the second click stop position (2) and
rotate counterclockwise to the correct time.
2. To set the date, press the top left corrector (D) with the pointer supplied. You will
need to adjust the date in this fashion at the end of each month.
3. To set the day, press the bottom left corrector (C) with the pointer supplied.
4. To set the month, press the bottom right corrector (B) with the pointer supplied.
You will need to adjust the month in this fashion at the end of each month.
5. To set the year, press the top right corrector (A) with the pointer supplied. You will
need to adjust the year in this fashion at the end of each year.
6. After everything is set, return the crown to its normal operating position (0). Again,
if it is a screw down crown, make sure it is correctly locked back in place.
Important:
Do not actuate
the correctors
between 9:00
p.m. and 3:00
a.m. Eastern
Standard Time.
This will damage
the mechanism.
Doing so will
void all warran-
ties from the
manufacturer.
3130
To Next Page
Loading...
