Invicta REMILLY - Appliance Installation Requirements; Safe Installation Distances

Wood stove REMILLY Référence: P601384
Code 1
XD, le 22/06/2021 Page 11 of 18
Specific user and installation manual
Please read this additional specific manual and the general manual also provided with the appliance carefully
Specifications as per EN 13240:
8
0
0
366
410
150
Construction specifications:
Rated power
7 kW
Efficiency
78 %
CO Rate%
0.08 %
Flamme Verte classification

Released dust concentration at 13% of O2
21 mg/Nm
3
Smoke temperature
318 °C
Recommended fuel
Wood / 25 cm logs
maximum possible length (horizontally): 34 cm
Smoke mass flow
5.6 g/s
Floor protection
The appliance must not be placed directly on flooring made of combustible materials or that could be damaged by heat.
If this occurs, place the appliance on a 50 cm wide and 50 cm long concrete slab, 45mm thick, covered with a reflective
surface on the appliance side (stainless steel type plate or plate with a glossy ceramic surface), the appliance should be
in the middle of this slab.
Minimum distance from adjacent combustible materials: 60 cm
If the neighbouring walls are made from non-combustible materials that are not damaged by heat (the wall temperature
can reach 200°C), these distances can be reduced to 15 cm.
Extended combustion
8 hours
Appliance weight
72 kg
Connection to the chimney flue using the nozzle
on the top of the appliance
diameter 150 mm
Dimensions
h 800 mm
len 436 mm
depth 364 mm
Door dimensions
h 489 mm
len 328 mm
Window dimensions
h 326 mm
len 228 mm
Identification plate
Engraved on the underside of the ash pan