Invicta VD53 - Movement Caliber VD53 Setting; Adjusting the Stopwatch Hand Position

Movement Caliber : VD53
Setting
Adjusting the Stopwatch Hand Position
Before setting the time, check if all the chronograph hands - second,
minute - are at the “0”(12 o’clock) position.
•
If the stopwatch is in use, press the buttons in the following order to
reset it, and then, check if the hands return to “0” position.
 (Fordetails,see“HOWTOUSETHESTOPWATCH”)
•
If the chronograph is counting : A > B
•
If the stopwatch is stopped : B
•
If the split time is displayed: B > A > B
If either of the stopwatch hands are not in the “0” position , reset them
following the procedure below
Pull the crown out to position 2. Push the crown back to the normal position.
PressbuttonAorBtoresetallstopwatch
hands to “0” position.
·
The stopwatch minute hand moves
correspondingly with the stopwatch
second hand.
·
The hands move quickly if the respective
buttons are kept pressed.
1.2
1.1 1.3