Why do my Inviting Homes Speakers make no sound via Bluetooth?
If your Inviting Homes Speakers aren't producing sound via Bluetooth, there might be a connection issue or the volume could be too low. First, ensure that your device is within 10 meters (33 ft) of the lamp and verify the Bluetooth connection status on your device. Then, check the volume levels on both the lamp and your connected device, adjusting them to an audible level.
What to do if the buttons on my Inviting Homes Speakers are not functioning?
If the buttons on your Inviting Homes Speakers aren't working, it could be due to a problem with the lamp's MPU. To resolve this, turn off the AC power switch, wait 20 seconds, and then restart the lamp.
What to do if Inviting Homes Speakers make no sound in AUX connected mode?
If your Inviting Homes Speakers aren't producing sound in AUX connected mode, the 3.5mm cable might not be properly connected, or the volume could be too low. Check the cable connection and adjust the volume to a suitable level.
Why is the bulb not turning on in my Inviting Homes Speakers lamp?
If the bulb in your Inviting Homes Speakers lamp isn't turning on, it could be due to a broken bulb or the light not being switched on. You should change the bulb. Also, make sure that the light is switched on using the button on the front control panel.
General| Brand | Inviting Homes |
|---|---|
| Model | Salt Lamp |
| Category | Speakers |
| Language | English |
Identifies power, mode, volume, and light controls on the front.
Lists loudspeaker, ports, power switch, and drainage on the back and top.
Covers opening the package, checking the bulb, and plugging in the lamp.
Details turning on the light, speaker, and indicator status for pairing.
Instructions on how to carefully place salt chunks into the clear cylinder.
Step-by-step guide for safely replacing the incandescent light bulb.
To Next Page