Need help?Do you have a question about the involight MH 250W and is the answer not in the manual?
Important safety warnings and cautions for device operation and handling.
Key safety warnings for device operation, including moisture and electrical shock hazards.
Manufacturer's liability limitations and warranty conditions for unauthorized modifications.
Caution regarding direct exposure to the light source and potential for severe eye damage.
Instructions for safe operation, including temperature, ventilation, and handling.
Identification and function of components on the rear panel, including power and DMX connections.
Description of front panel buttons and display for device operation and settings.
Procedure for installing and replacing the fixture's lamp, including safety warnings.
Steps for adjusting the lamp position to optimize light performance and focus.
Instructions for configuring the Fresnel lens system to set the desired beam angle.
Critical safety guidelines and procedures for securely rigging and installing the fixture.
Guidance on connecting the fixture to the mains power supply, including wiring details.
Instructions for connecting multiple fixtures using the DMX-512 protocol.
Details on XLR pin assignments for DMX input/output and termination requirements.
Explains pinout conversions between 3-pin and 5-pin DMX connectors.
Explains the function and range of the DMX PAN control channel.
Explains the function and range of the DMX TILT control channel.
Details the DMX channel controlling the speed of pan and tilt movements.
Describes the DMX channel functions for lamp switching and resetting the fixture.
Visual representation and data for beam opening and diameter at different distances for 8° and 22° angles.
Graph showing radiation angle and intensity (LUX/Foot-candles) relative to beam diameter at 5 meters.
Common faults and potential solutions when the entire light fixture fails to operate.
Common issues related to bulb illumination and fan system malfunctions.
Diagnoses problems with fixture control, stuck-on lights, and signal response.
Common motor failures and issues with color wheel, effect wheel, dimmer, and strobe functions.
Guidelines for cleaning the fixture's external and internal components, including lenses and fans.
Step-by-step instructions for safely replacing the fuse in the fixture.
Important safety warnings and cautions for device operation and handling.
Key safety warnings for device operation, including moisture and electrical shock hazards.
Manufacturer's liability limitations and warranty conditions for unauthorized modifications.
Caution regarding direct exposure to the light source and potential for severe eye damage.
Instructions for safe operation, including temperature, ventilation, and handling.
Identification and function of components on the rear panel, including power and DMX connections.
Description of front panel buttons and display for device operation and settings.
Procedure for installing and replacing the fixture's lamp, including safety warnings.
Steps for adjusting the lamp position to optimize light performance and focus.
Instructions for configuring the Fresnel lens system to set the desired beam angle.
Critical safety guidelines and procedures for securely rigging and installing the fixture.
Guidance on connecting the fixture to the mains power supply, including wiring details.
Instructions for connecting multiple fixtures using the DMX-512 protocol.
Details on XLR pin assignments for DMX input/output and termination requirements.
Explains pinout conversions between 3-pin and 5-pin DMX connectors.
Explains the function and range of the DMX PAN control channel.
Explains the function and range of the DMX TILT control channel.
Details the DMX channel controlling the speed of pan and tilt movements.
Describes the DMX channel functions for lamp switching and resetting the fixture.
Visual representation and data for beam opening and diameter at different distances for 8° and 22° angles.
Graph showing radiation angle and intensity (LUX/Foot-candles) relative to beam diameter at 5 meters.
Common faults and potential solutions when the entire light fixture fails to operate.
Common issues related to bulb illumination and fan system malfunctions.
Diagnoses problems with fixture control, stuck-on lights, and signal response.
Common motor failures and issues with color wheel, effect wheel, dimmer, and strobe functions.
Guidelines for cleaning the fixture's external and internal components, including lenses and fans.
Step-by-step instructions for safely replacing the fuse in the fixture.
General| Brand | involight |
|---|---|
| Model | MH 250W |
| Category | Lighting Equipment |
| Language | English |
To Next Page
