INVT iMars BG25KTR

iMars grid-tied solar inverters Display panel
46
Table 6-4 Parameters setting
Setting item
LCD display
Instruction
RS485
A
ddress
RS485 Address
001
1
Enter into the interface and edit the data
through
“ ” or “ ”. A
nd then press
“ENT
” again to the next bit. After
editing
the three bits, press
“ENT” to save
the
edition and press “ESC” to exit.
User
pass
word
User Password
0000
0
Enter into the interface and edit the data
through
“ ” or “ ”. And then press
“ENT
” again to the next bit. After
editing
the four bits, press
“ENT” to save the
edit
ion and press “ESC” to exit.
T
he default password is “0000”;
the user
can enter into the setting interface
without password.
I
f the password is not
“0000
”, the user can enter into the
setting interface with password.