To Next Page
H
heather75Aug 20, 2025
Why is my INVT iMars BG15KTR showing AC overvoltage?
- RRyan ThompsonAug 20, 2025
AC overvoltage in your INVT Inverter is due to high voltage from the public grid.
Why is my INVT iMars BG15KTR showing AC overvoltage?
AC overvoltage in your INVT Inverter is due to high voltage from the public grid.
Why is my INVT Inverter showing AC undervoltage?
AC undervoltage in your INVT Inverter is caused by low voltage from the public grid.
What causes input overvoltage in INVT iMars BG15KTR?
Input overvoltage in your INVT Inverter is due to DC input overvoltage.
What does output short-circuit mean on my INVT iMars BG15KTR Inverter?
Output short-circuit on your INVT Inverter means there is a short-circuit at the output.
What causes input overcurrent in my INVT Inverter?
Input overcurrent in your INVT Inverter is due to DC input overcurrent.
What does AC overcurrent mean for INVT iMars BG15KTR?
AC overcurrent in your INVT Inverter indicates an internal AC overcurrent situation.
What causes AC overfrequency in INVT Inverter?
AC overfrequency in your INVT Inverter is due to high frequency from the public grid.
What causes AC underfrequency in INVT Inverter?
AC underfrequency in your INVT Inverter is due to low frequency from the public grid.
What does huge leakage current mean in my INVT iMars BG15KTR Inverter?
A huge leakage current in the INVT Inverter indicates a substantial leakage current within the system or the inverter itself.
What does data consistency fault mean for INVT iMars BG15KTR Inverter?
A data consistency fault in your INVT Inverter indicates inconsistent grid voltage, frequency, leakage current, or AC/DC injection.
Provides essential safety rules for handling and operating the inverter.
Safety instructions for receiving, handling, and installing the inverter.
Safety guidelines specific to operating the inverter while connected to the grid.
Safety procedures for performing maintenance and inspections on the inverter.
Guidelines for selecting an appropriate and safe installation site.
Instructions for physically mounting the inverter.
Specific steps for the mechanical installation of the three-phase inverter.
Detailed instructions for making electrical connections to the inverter.
Procedure for connecting the DC input from solar modules to the inverter.
Steps for connecting the AC output for various inverter models.
Essential checks to perform before powering on the inverter.
Step-by-step guide for operating the inverter in grid-tied mode.
Procedure for safely shutting down the inverter.
Provides a list of fault codes, messages, instructions, and fault analysis for troubleshooting.
Detailed technical specifications for various iMars inverter models, including DC input, AC output, and system parameters.
General| Model | iMars BG15KTR |
|---|---|
| Rated Output Power | 15000 W |
| Max. DC Input Voltage | 1100V |
| Input Voltage Range | 200-1000V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 26 A |
| Max. AC Output Power | 16500 VA |
| AC Voltage Range | 310-480V |
| Grid Frequency | 50/60Hz |
| Max. Efficiency | 98.6% |
| THDi | <3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Rated AC Voltage | 3/N/PE, 230/400 V |
| Operating Temperature Range | -25°C to +60°C |
