Need help?Do you have a question about the INVT iMars Series and is the answer not in the manual?
Explanation of warning symbols indicating potential hazards and instructions for prevention.
General safety guidelines for installation, operation, and maintenance of the inverter.
Instructions for the safe delivery, handling, and initial setup of the inverter unit.
Procedures and requirements for operating the inverter in a grid-tied configuration.
Steps for performing regular maintenance and inspection of the energy storage inverter.
Guidance on the responsible disposal and recycling of the inverter after its end-of-life.
Overview of the energy storage system, including its components and their interconnections.
Description of the physical appearance of the energy storage inverter and its external components.
Identification and description of the key external components and terminals of the inverter.
Explanation of the technical specifications and identification details on the inverter's nameplate.
Explanation of Demand Response Mode (DRM) functions and their operational requirements.
Overview of the different models of the PV energy storage inverter available.
Detailed physical dimensions and weight specifications for the energy storage inverter.
Procedures for inspecting the inverter and its accessories after unpacking for any damage.
Pre-installation checks and preparations, including tools and site selection.
List of essential tools and instruments required for the installation of the inverter.
Specifications for AC/DC and battery cables required for connecting the inverter.
Recommended specifications for circuit breakers for DC input, AC output, and battery sides.
Step-by-step guide for the physical mounting and installation of the inverter.
Detailed instructions for connecting the PV strings to the energy storage inverter.
Step-by-step procedure for correctly connecting the PV modules to the inverter.
Instructions for connecting the inverter to the public grid and the load.
Detailed steps for safely connecting the battery to the energy storage inverter.
Procedure for establishing CAN communication between the inverter and batteries.
Instructions for setting up RS-485 communication for monitoring and control.
Information on using the USB interface for software updates.
Description of the DRM ports on the inverter and their pin definitions.
Explanation of the LED indicators on the inverter and their corresponding states.
Instructions for navigating and understanding the inverter's LCD display interface.
Explanation of the function of each button on the inverter's control panel.
Description of the main interface displayed on the inverter's LCD screen.
Explanation of the icons displayed on the LCD screen and their meanings.
Overview of the menu structure and available parameters on the inverter's LCD display.
Classification of inverter parameters into different categories for setup.
Procedure for editing and modifying inverter parameters through the interface.
Detailed instructions and valid ranges for setting various inverter parameters.
Description of the self-consumption working mode and energy flow.
Explanation of peak shaving and valley filling mode for electricity price optimization.
Description of the Emergency Power Supply (EPS) mode for grid failures.
To Next Page
General