iMars series PV energy storage inverter Installation
18
4 Installation
This chapter describes the installation of the inverter and the connection of the inverter to the
energy storage system. It mainly involves the connection of the PV string, the public power grid,
the battery, and the load to the inverter. Read this chapter carefully and ensure all installation
requirements are met before installation. Only qualified electricians are allowed to install the
inverter.
4.1 Unpacking inspection
The inverter has been thoroughly tested and rigorously checked before delivery, but damage may
still occur during transportation. Before unpacking, check carefully whether the product information
in the order is consistent with that on the nameplate of the package box and whether the product
package is intact. If any damage is detected, please contact the shipping company or the supplier
directly. Please also provide photos of the damage to get our fastest and best service.
Store the idled inverter in its original package and take anti-moisture and anti-dust measures.
After taking the inverter out of the box, check the following items:
(1) Confirm the main body of the inverter is intact and free from any damage;
(2) Confirm there is operation manual, interface accessories and installation accessories
inside the package box;
(3) Confirm the deliverables inside the package box are intact and complete;
(4) Check whether the product information in the order is consistent with that on the inverter
nameplate;
(5) The standard delivery list is shown below.
To Next Page
Loading...
Need help?
General