INVT GD100-004G-2-PV User Manual

Solar Pumping VFD
Goodrive100-PV Series

INVT GD100-004G-2-PV Specifications

General

Brand	INVT
Model	GD100-004G-2-PV
Category	Inverter
Language	English

Summary

1 Safety precautions

1.1 Safety definition

Defines 'Danger', 'Warning', 'Note', and 'Qualified electricians' terms.

1.2 Warning symbols

Explains warning symbols used in the manual, including Danger, Warning, Do not, Hot sides, and Note.

1.3 Safety guidelines

Provides essential safety guidelines for operating VFDs, including waiting times and precautions.

3 Installation guidelines

3.1 Mechanical installation

Covers aspects of mechanically installing the VFD, focusing on the installation environment.

3.2 Standard wiring

4 Keypad operation procedure

4.3 Keypad operation

5 Commissioning guidelines

5.1 Inspection before operation

5.2 Trial run

5.3 Parameter settings

Explains how to access and set parameters via the keypad after powering on the VFD.

6 Function parameters

6.1 Common function parameters for solar pumping control

Details common function parameters for solar pumping, including speed control and run command channel.

6.2 Parameters of special functions

Lists parameters related to special functions, such as protective parameters and frequency decrease settings.

Appendix B Recommended solar modules

B.1 Recommended configuration for solar pumping VFDs

Appendix C Power frequency & PV switching solution

C.1 Solution introduction

C.1.1 QH100-PV switching module