Need help?Do you have a question about the INVT GD100-015G-4-PV and is the answer not in the manual?
General| Model | GD100-015G-4-PV |
|---|---|
| Category | Inverter |
| Rated Power | 15 kW |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Output Voltage | AC 380V/400V/415V, 3-phase |
| Efficiency | 98% |
| Operating Temperature | -10℃~50℃ |
| Storage Temperature | -20℃~+70℃ |
| Humidity | 5%~95%, non-condensing |
| Altitude | ≤ 2000 m |
Defines hazard levels (Danger, Warning, Note) and qualified electricians.
Explains standard warning symbols used in the manual.
Provides critical safety instructions for operation and installation.
Covers environmental conditions and site requirements for VFD installation.
Specifies acceptable temperature, humidity, and site conditions for VFDs.
Details the wiring procedures for main and control circuits.
Guides users on navigating menus and modifying parameters using the keypad.
Lists essential checks before powering on the VFD for the first time.
Details essential parameters for controlling solar pumping applications.
To Next Page
