Need help?Do you have a question about the INVT GD100-011G-4-PV and is the answer not in the manual?
General| Model | GD100-011G-4-PV |
|---|---|
| Type | Solar Inverter |
| Rated Power | 11 kW |
| Output Power | 11 kW |
| Frequency Range | 50/60Hz |
| Efficiency | 98% |
| Protection Level | IP20 |
| Cooling Method | Forced Air Cooling |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +50°C |
| Input Voltage | 380V |
| Output Voltage | 3-phase, 380V |
| PV Input Voltage | 600V |
| Humidity | 5% to 95%, non-condensing |
| Altitude | <2000m |
Outlines safety rules for VFD operation, wiring, and component handling.
Lists technical specifications like input/output voltage, current, and power ratings.
Covers environmental requirements and installation site preparation for the VFD.
Details VFD installation site conditions like temperature, humidity, and pollution.
Explains the standard wiring procedures for the VFD's main circuit.
Explains how to operate the VFD using the keypad, including modifying function codes.
Explains how to access parameters, set them via keypad, and perform a trial run.
Introduces common parameters for solar pumping applications, grouped by function.
Parameters for configuring motor characteristics, such as type, power, and frequency.
Parameters related to SVPWM control, including V/F curve settings and torque boost.
Details the installation and specifications of the boost module for improved solar utilization.
To Next Page
