Need help?Do you have a question about the INVT GD100-045G-4-PV and is the answer not in the manual?
General| Model | GD100-045G-4-PV |
|---|---|
| Rated Output Power | 45kW |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Ambient Temperature Range | -25°C to +60°C |
| Storage Temperature Range | -40°C to +70°C |
| Type | Solar Inverter |
| Input Voltage | 600 V |
| Output Voltage | 380 V |
| Output Frequency Range | 50/60 Hz |
| Communication Interface | RS485 |
| Relative Humidity | 5~95%, no condensation |
| Altitude | 0 m - 2000 m |
Provides essential safety guidelines for VFD operation, installation, and maintenance.
Details precautions for VFD delivery and installation.
Covers environmental requirements, direction, and mounting methods.
Explains how to perform standard wiring and terminal functions.
Details how to operate the VFD using the control panel.
Lists common parameters for solar pumping control.
Details inverter phase protection and overvoltage faults.
Covers overcurrent, motor, and VFD overload faults.
Addresses phase loss and electronic underload faults.
Discusses overheat, communication, and current detection faults.
Details PV overcurrent, overvoltage, and undervoltage faults.
Explains weak light, full-water, and empty-water alarms.
Describes the installation and wiring of the boost module.
To Next Page
