Need help?Do you have a question about the INVT GD100-1R5G-4-PV and is the answer not in the manual?
General| Rated Power | 1.5 kW |
|---|---|
| Model | GD100-1R5G-4-PV |
| Frequency Range | 0~600Hz |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Communication Interface | RS485 |
| Output Voltage | AC 380V |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20℃~60℃ |
| Relative Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 2000 m |
Outlines general safety rules for VFD operation and installation.
Covers environmental conditions and mounting for mechanical installation.
Provides guidance on standard wiring practices.
Introduces the VFD keypad and its connectivity.
Explains the different display states of the VFD keypad.
Guides on how to navigate and change VFD function codes.
Detailed steps for modifying VFD function codes.
Guide on how to access and set VFD parameters.
Lists common parameters for solar pumping applications.
Details parameters for specific or advanced functions.
Provides a table of fault codes, causes, and solutions.
Details the installation and specifications of the boost module.
Explains the GPRS module for remote monitoring and APP connection.
Explains the use and selection of output reactors for long cable runs.
Lists recommended solar module configurations for VFDs.
To Next Page
