Need help?Do you have a question about the INVT GD100-2R2G-4-PV and is the answer not in the manual?
General| Model | GD100-2R2G-4-PV |
|---|---|
| Rated Power | 2.2 kW |
| Rated Output Current | 5.5 A |
| Cooling Method | Forced Air Cooling |
| Enclosure Rating | IP20 |
| Overload Capacity | 150% for 60 seconds |
| Control Method | V/F control |
| Carrier Frequency | 1 kHz to 15 kHz |
| Protection Features | Overvoltage, undervoltage, overload, overheat |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +50°C |
| Ambient Humidity | 95% RH, non-condensing |
| Altitude | Below 1000m (Derating above 1000m) |
| Storage Temperature | -20°C to 60°C |
| Application | Solar pumping systems |
Provides essential safety rules for VFD operation, installation, and maintenance.
Lists technical specifications like input voltage, output power, and protection levels.
Explains the standard wiring procedures for main and control circuits of the VFD.
Guides the user on how to access and set VFD parameters, including switching to keypad control mode.
Details common parameters related to speed control, run command channels, and output frequency.
Covers parameters for special functions like phase loss protection and frequency decrease settings.
Explains the cause and solutions for inverter unit U phase protection faults.
Details possible causes and solutions for ACC overcurrent faults.
To Next Page
