INVT GD100-5R5G-2-PV User Manual

Solar Pumping VFD
Goodrive100-PV Series

INVT GD100-5R5G-2-PV Specifications

General

Brand	INVT
Model	GD100-5R5G-2-PV
Category	Inverter
Language	English

Summary

Safety Precautions

1.1 Safety Definition

1.2 Warning Symbols

Explains various warning symbols used in the manual and their meanings.

1.3 Safety Guidelines

Provides guidelines on VFD operation, wiring, and handling to prevent hazards.

1.3.2 Commissioning and Running

Details procedures for commissioning and running the VFD safely.

1.3.3 Maintenance and Replacement of Components

Installation Guidelines

3.1 Mechanical Installation

Covers environmental requirements and site preparation for VFD installation.

3.2 Standard Wiring

Details the standard wiring procedures for the VFD's main circuit.

3.2.1 Terminals of Main Circuit

Explains the function of each terminal in the VFD's main circuit.

3.2.2 Terminals of Control Circuit

Details the functions of the VFD's control circuit terminals.

Keypad Operation Procedure

4.1 Keypad Introduction

4.3 Keypad Operation

Details how to operate the VFD using the control panel buttons.

4.3.1 How to Modify the Function Codes of the VFD

Explains how to navigate and change VFD function codes.

4.3.2 How to Set the Password of the VFD

4.3.3 How to Watch the VFD State Through Function Codes

Commissioning Guidelines

5.1 Inspection Before Operation

Lists checks to perform before powering on the VFD.

5.2 Trial Run

5.3 Parameter Settings

Explains how to enter parameter setting mode and adjust settings.

5.4.2 Special Settings for Single Phase Motors

Function Parameters

6.1 Common Function Parameters for Solar Pumping Control

Details common parameters for solar pumping applications.

Appendix A Options and Use

A.1 Boost Module

Details the installation and specifications of the boost module.

A.2 GPRS Module and Monitoring APP

A.4 Reactors

Appendix B Recommended Solar Modules

B.1 Recommended Configuration for Solar Pumping VFDs

Lists recommended solar module configurations for VFD models.

B.2 Recommended Configuration for VFDs with the Boost Module

Appendix C Power Frequency & PV Switching Solution

C.1 Solution Introduction

C.1.1 QH100-PV Switching Module

C.1.2 Model Selection Reference for Low-Voltage Apparatus

C.2 IP54 Protection-Level VFDs

C.4 Parameter Setting Method