Need help?Do you have a question about the INVT GD100-1R5G-SS2-PV and is the answer not in the manual?
General| Rated Power | 1.5 kW |
|---|---|
| Control Method | V/F control, Sensorless vector control |
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Overheat, Short circuit |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +50°C |
| Ambient Humidity | 5% to 95%, non-condensing |
| Altitude | Up to 1000m |
| Storage Temperature | -20°C to +60°C |
Provides essential safety rules for VFD operation, installation, and maintenance procedures.
Covers environmental conditions, mounting, and installation site requirements for optimal VFD performance.
Details the wiring procedures for the main circuit and control terminals of the VFD.
Details essential function parameters for configuring the VFD for solar pumping applications.
Provides a comprehensive table listing fault codes, possible causes, and troubleshooting solutions.
Introduces the concept of switching between power frequency and PV input for VFDs.
To Next Page
