To Next Page
J
Jacob BlakeSep 9, 2025
What does high DC injection mean in my INVT iMars BG15KTR Inverter?
- MMelinda GarciaSep 9, 2025
High DC injection in your INVT Inverter means there is high DC injection during AC output.
What does high DC injection mean in my INVT iMars BG15KTR Inverter?
High DC injection in your INVT Inverter means there is high DC injection during AC output.
General| Model | iMars BG15KTR |
|---|---|
| Rated Output Power | 15000 W |
| Max. DC Input Voltage | 1100V |
| Input Voltage Range | 200-1000V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 26 A |
| Max. AC Output Power | 16500 VA |
| AC Voltage Range | 310-480V |
| Grid Frequency | 50/60Hz |
| Max. Efficiency | 98.6% |
| THDi | <3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Rated AC Voltage | 3/N/PE, 230/400 V |
| Operating Temperature Range | -25°C to +60°C |
Provides essential safety rules for handling and operating the inverter.
Safety instructions for receiving, handling, and installing the inverter.
Safety guidelines specific to operating the inverter while connected to the grid.
Safety procedures for performing maintenance and inspections on the inverter.
Guidelines for selecting an appropriate and safe installation site.
Instructions for physically mounting the inverter.
Specific steps for the mechanical installation of the three-phase inverter.
Detailed instructions for making electrical connections to the inverter.
Procedure for connecting the DC input from solar modules to the inverter.
Steps for connecting the AC output for various inverter models.
Essential checks to perform before powering on the inverter.
Step-by-step guide for operating the inverter in grid-tied mode.
Procedure for safely shutting down the inverter.
Provides a list of fault codes, messages, instructions, and fault analysis for troubleshooting.
Detailed technical specifications for various iMars inverter models, including DC input, AC output, and system parameters.
