INVT RBU100H

RBU100H operation manual 5 Keypad operation
-17-
Button
Name
Function
STOP
RST
STOP/RST
Key
In running status, restricted by P0.00, can be used to stop the
device. When fault alarm, the button can be used to reset the
device without any restriction.
5.1.3 Indicators
1) Function indicator light description:
Function indicator
Description
RUN/TUNE
Extinguished: stop status
Flickering: parameter autotuning status
Light on: operating status
LOCAL/REMOT
Extinguished: keypad control
Flickering: terminal control
Light on: communication control
TRIP
Extinguished: normal operation status
Flickering: overload pre-warning status
2) Unit indicator light description:
Function indicator
Description
Hz
Frequency unit
A
Current unit
V
Voltage unit
RPM
Rotating speed unit
％
Percentage
System temperature
3) Digital display:
5-digit LED, which can display all kinds of monitoring data and alarm codes such as reference
frequency, output frequency and so on.