2
Install Drive
IMPORTANT:
USB 2.0 is a very new technology. Since most computers will not have native
support for USB 2.0, you must install a USB 2.0 adapter card for your
Iomega
®
CD-RW USB drive to run at USB 2.0 speeds. If you do not have a
USB 2.0 card installed, the Iomega CD-RW USB drive will still work connected
to a standard USB connection at standard USB speeds.
PC Users—After installing a USB 2.0 adapter card, make sure there are no
exclamation marks under Universal Serial Bus Controllers in the device
manager.
To find out:
1. Right click
My Computer and select Properties.
2. Select the Device Manager tab.
3. Scroll down until you find the Universal Serial Bus Controllers. Click the
plus sign next to it and make sure there are no yellow exclamation
marks.
4. If there is a yellow exclamation mark or if
Universal Serial Bus
Controllers does not appear in Device Manager after installing the USB
2.0 card, contact the card’s manufacturer for help.
Mac Users—USB 2.0 support depends on the USB 2.0 adapter card you
use. Consult the card’s manufacturer for more information.
To Next Page
Loading...
