Need help?Do you have a question about the Iomega Zip ATAPI and is the answer not in the manual?
General| Interface | ATAPI |
|---|---|
| Form Factor | Internal |
| Media Type | Zip Disk |
| Average Seek Time | 29 ms |
| Data Transfer Rate | Up to 1.4 MB/s |
| Compatibility | PC, Mac |
| Capacity | 100 MB / 250 MB |
Record the drive's serial number before proceeding with installation, noting potential computer configuration differences.
Insert the installation CD and select your preferred language for the setup process.
Locate and print the detailed installation guide from the User's Manual on the CD.
Launch the lomegaWare software installation by selecting the 'Click to Install' option.
Safely shut down the computer, disconnect the power cord, and remove the computer cover.
Ensure the drive's jumper settings are correctly configured by referring to printed instructions.
Locate a vacant drive bay and slide the Zip ATAPI drive into it after removing the panel cover.
Identify the IDE data cable connected to the computer's CD-ROM drive.
Connect the middle connector of the CD-ROM drive's IDE data cable to the Zip ATAPI drive.
Connect a spare power supply cable from the computer to the Zip ATAPI drive.
Replace the computer cover, connect the power cord, restart, and insert a Zip disk.
Consult the User's Manual on the CD for comprehensive information and system requirements.
Register your lomega product online for easier and faster service and support.
Find various options for service and support needs by visiting the official website.
Information regarding the product's compliance with European Community directives and standards.
To Next Page
