Iomega External DVD - External DVD Optical Drive - User Manual

1
ENGLIS
H
SAFETY INSTRUCTIONS
1. Please read these safety instructions carefully.
2. Please keep this User’s Manual for your reference.
3. Please disconnect the equipment from your AC outlet before cleaning.
Do not use liquid or sprayed detergent for cleaning.
Use moist sheet or cloth for cleaning.
4. For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
5. Please keep this equipment away from humid areas.
6. Install this equipment on a reliable surface. If the equipment is not on a reliable surface,
it may drop and cause injury.
7. The openings on the enclosure are for air convection. Please protect the equipment from
overheating . DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is appropriate when connecting the
equipment to the power outlet.
9. Place the power cord where people will not step or trip on it. Do not place objects over
the power cord.
10. All Cautions and Warnings on the equipment should be noted.
11. If the equipment is not in use for several days, disconnect the equipment from the power
outlets to avoid damage by transient power surges.
12. Never pour any liquids into the openings, this could cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should only be opened by
qualified service personnel.
14. If one of the following situations arises, get the equipment checked by a qualified
service personnel:
(a) The power cord or plug is damaged.
(b) Liquid has penetrated into the equipment.
(c) The equipment has been exposed to moisture.
(d) The equipment has not worked well or you can not get it to work according to the
user’s manual.
(e) The equipment was dropped and damaged.
(f) If the equipment has obvious signs of damage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED;
STORAGE TEMPERATURE ABOVE 60℃(140℉), IT MAY DAMAGE THE
EQUIPMENT. The sound pressure level at the operators position according to IEC704-
1:1982 is equal or less than 70dB(A)
16. DANGER: Invisible laser radiation when opened. Avoid direct exposure to beam.
Complies with FDA radiation performance standards,21 CFR, subchapter J.
Laser power: Wave Length: 783±3nm (CD); 658±3nm (DVD)
Emission power:0.7mW
Laser diode: class 3b

Summary

SAFETY INSTRUCTIONS

Prevent Overheating and Ensure Airflow

Instructions to prevent overheating by not covering ventilation openings.

Power Cord Safety

Liquid and Opening Precautions

Avoid pouring liquids into openings and never open the equipment yourself.

Professional Service Requirements

Details conditions requiring professional service for the equipment.

Environmental and Laser Safety

Specifies operating/storage limits, sound pressure, and invisible laser radiation warnings.

PRECAUTIONS

Warning: Tampering Hazards

Do not open the drive; risk of exposure to laser beams and electrical voltage.

Handling and Environmental Care

SYSTEM CONFIGURATION

USB 2.0 System Requirements

Details the requirements for achieving maximum speeds using a USB 2.0 interface.

FEATURES AND CONTROLS

Front Panel Overview

Rear Panel Connections

INSTALLATION

USB 2.0 Interface Setup

Instructions for connecting and verifying the USB 2.0 adapter card for optimal performance.

Windows 98 SE Driver Installation

Specific steps to install the USB driver for Windows 98SE users.

Physical Connection Guide

Step-by-step guide for connecting the power supply, USB cable, and optional audio cable.

Drive Installation Steps

OPERATION

Loading and Unloading the Tray

TROUBLESHOOTING

Read Problems and Solutions

Write Problems and Solutions

Iomega External DVD - External DVD Optical Drive Specifications

General

Type	External DVD Optical Drive
Enclosure Type	External
Interface	USB 2.0
Read Speed	8x DVD / 24x CD
Rewrite Speed	16x CD-RW
Supported Disc Types	CD-R, CD-RW, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD-RAM
System Requirements	Windows XP/Vista/7, Mac OS X 10.4 or later
Write Speed	8x DVD / 24x CD