This document describes the iON Tech Home EV Charger, an outdoor single-gun AC charging station designed for electric vehicles. It offers multi-functionality with WIFl/APP/Bluetooth/RFID connectivity, providing AC charging power to Type 2 EV's. The charger features a user-friendly computer interaction touch screen and a card reader, allowing for convenient control via an APP.
Important Safety Instructions
Installation of the iON EV Charger must be undertaken by a registered electrician. Users are advised to read all instructions carefully before operating the device to prevent injury or damage.
Symbol Usage:
- DANGER: Indicates information about safety practices which, if not followed, may result in serious injury or death.
- WARNING: Indicates information about safety practices which, if not followed, could result in personal injury or are necessary to prevent fire or equipment overheating.
- NOTE: Indicates helpful information for installation or usage, but does not contain personnel or equipment safety related information.
General Operational Safety Warnings:
- DANGER: Do not operate the Charging Dock with a damaged output cable, connector, or Charging Dock housing. Visually inspect the output cable, connector, and Charging Dock housing for damage before each use. If you detect any damage, stop using the Charging Dock and contact Customer Support.
- WARNING: Always position the Charging Dock output cable so that it will not be driven over, stepped on, tripped over, or otherwise damaged or stressed during use. To prevent personal injury and damage to the Charging Dock, output cable, and connector, always stow the output cable after use.
- WARNING: STRANGULATION HAZARD: Small children could become entangled in the output cable and be strangled. Keep small children away from the Charging Dock, and always stow the output cable after use.
- WARNING: The Charging Dock is intended for use by licensed drivers only. Children should not be allowed to play near the Charging Dock. Do not allow children to play near the Charging Dock. Close supervision of children is necessary when the Charging Dock is used near children.
- WARNING: Use the Charging Dock only to supply power to electric vehicles equipped with a compatible vehicle receptacle. If you do not know whether a vehicle is equipped with a compatible vehicle receptacle, check the owner's manual.
High Voltage Warning:
- DANGER: High voltage is present in your electric meter housing and power distribution service panel. Contact with high voltage can cause death or serious personal injury.
- WARNING: It is recommended that your Charging Dock be installed by a licensed electrician. To avoid serious injury or death, installation must be in accordance with the manufacturer's installation instructions and must comply with the provisions of the National Electrical Code (NEC) and all local codes. In cases of conflict between local codes and the NEC, local codes shall take precedence.
Additional Safety Information:
- When the Charging Dock connector is properly connected to the vehicle receptacle, the vehicle propulsion system is disabled. The output cable has a safety break-away feature in case the vehicle is moved or unintentionally rolls away from the parking location with the cable connected to the vehicle. The safety break-away feature will allow output cable separation from the Charging Dock if the output cable is yanked or pulled with excessive force.
- The output cable should be coiled up on the hanger when not in use to minimize damage to the cable and eliminate the possibility of tripping.
- WARNING: If the output cable becomes separated from the Charging Dock, DO NOT ATTEMPT TO REPAIR THE CABLE YOURSELF.
Technical Specifications
The iON EV Charger is available in three models:
- 7KW32TAS - 7KW Single Phase AC 32A
- 11KW32TAS - 11KW 3 Phase AC 3 x 16A
- 22KW32TAS - 22KW 3 Phase AC 3 x 32A
General Specifications:
- Name: AC EV Charger APP/Wi-Fi/RFID
- Temperature: -30°C~+55°C
- Humidity: 5%~95% no congeal
- Altitude height: 2000m
- Noise control: less than 30db
- Safety standards: GB/T20234.GB/T18487.GB/T27930.NB/T33008.N B/T3300L RoHS Approved BT Radio
- Input voltage: AC220V±15%/AC380V±15%
- Input frequency: 50Hz/60Hz
- The max power: 7kw 32 AMP
- Electric relay specification: 50A 250VA
- Rated output: Single gun max output 32A
- Charging method: RFID card/APP
- Application: Indoor/Outdoor
Usage Features
Charging Process:
- Connect the charger gun from the pile and insert it into the charging socket of the electric car. Ensure reliable connection.
- Swipe the card enclosed with your charger to simply tap to start charging, or use the app.
- Download the app to control the charger. The app is compatible with Smart life APP or Tuya Smart APP, available on the App Store and Google Play.
Wi-Fi Operations:
- Open the smart home application and use the add device function.
- Follow instructions and add your home Wi-Fi by selecting the SSID and entering your Wi-Fi password.
- Once connected, the charger will show up in the list of devices.
- The Bluetooth is only used for connecting the charger to your Wi-Fi and to obtain data from the application in the background. The charger cannot be connected to Bluetooth as a paired device.
Online Version (App Control):
- Download the "Smart Life" APP on your mobile phone.
- After the download is complete, start the APP, select Add Device, and follow the operation instructions to add the new device. You can then start charging and know the state of charge.
- Use the app to start charging or set charge start time and duration.
Charging Modes:
The charger supports various charging modes:
- Online Version: Control via mobile APP.
- Single Mode-Card / Reservation Mode-Card / Plug and Charge: These modes are selected through the system settings.
- Metering Mode: Internal meter/external meter.
- Ground Detection and PEN Protection: Ensures safety during charging.
Reservation Charging Mode:
- Enter the time you want to start charging in the scheduled charging screen.
- Enter the number of hours to charge in the reservation time screen.
- You can customize the charge based on power (kW·h), amount (USD), or time (minutes).
Plug and Charge:
Simply insert the charging gun to start charging.
Maintenance Features
Preparation Before Use:
- Ensure that there are no open flames around the station and the surrounding space is open without any blockages.
- Ensure that the charging station body and charging cable are intact.
- Ensure proper maintenance of equipment.
- Make sure that the emergency stop button is in the pop-up state. If it has been pressed, rotate the knob in the direction indicated by the knob arrow to return to the pop-up state.
Safety Notices for Maintenance:
- Do not place flammable, explosive or combustible materials, chemicals, vapors and other dangerous items near the charging station.
- Keep charging head clean and dry. Use clean dry cloth wipe if it has dirt. It is strictly forbidden to touch the charging gun core with power on.
- Strictly forbidden to use the charging station when charging gun or charging cable has any damage, for example cracks, wear, broken and charging cable naked wire exposed.
- Do not try to disassemble, maintain and rebuild the charging station. Contact your electrician in the unlikely event the charger requires maintenance. Incorrect operation may cause damage, water leakage, electric leakage and other situation including risk of electric shock and death.
- Strictly forbidden to unplug the gun head during charging.
- Press down the emergency stop button in any the abnormal situations during use. Cut off the input power from the supply.
- Please charging carefully when raining and thunder weather.
- Keep away from children.
- Forbidden to drive the vehicle during charging. Only can charge when at static situation. Ensure the charger plug is safely stowed before starting the car and driving.
Troubleshooting:
- If the equipment jumps to a failure page, remind the failure reason.
- If the equipment failure then can't charge, only can jump to normal charging interface till failure recovered.
The iON EV Charger is designed to be a reliable and user-friendly solution for electric vehicle charging, incorporating essential safety features and flexible operational modes.
Need help?
General
To Next Page
