7
Playback
Playing a Tape:
1. Press the Stop/Eject button to open the cassette holder.
2. Insert a tape and close the cassette holder.
3. Press the Play button to play the tape.
IMPORTANT! After extensive usage, tape heads can acquire oxide build-up, especially if the
cassettes are old. To ensure best performance, use a tape head cleaner periodically.
USB Flash Drive Playback:
Note: If both a USB flash drive and SD card are inserted, the unit will default to using the USB flash
drive.
Note: In USB mode, files are played in alphabetical order from what is on the root level, then
alphabetical by folder, and then alphabetical by track name.
1. Connect the USB flash drive to the USB port.
2. Set the Function switch to USB.
3. To skip a track, press and release the Next Track button.
4. To fast forward a track, press and hold the Next Track button.
5. To go to the previous track, press and release the Previous Track button.
6. To rewind a track, press and hold the Previous Track button.
SD Card Playback:
Note: If both a USB flash drive and SD card are inserted, the unit will default to using the USB flash
drive.
Note: In SD mode, files are played in alphabetical order from what is on the root level, then
alphabetical by folder, and then alphabetical by track name.
1. Insert the SD card into the SD card slot.
2. Set the Function switch to USB.
3. To skip a track, press and release the Next Track button.
4. To fast forward a track, press and hold the Next Track button.
5. To go to the previous track, press and release the Previous Track button.
6. To rewind a track, press and hold the Previous Track button.
To Next Page
Loading...
Need help?
General
