Meter-Controlled Regeneration
The Model IQ control minimizes salt usage and water waste by accurately monitoring the conditioned
water and then initiating a regeneration only when the S-759 mineral is near exhaustion. Six-cycle
downflow brining assures accurate salting while the adjustable time regeneration program uses the
minimum amount of water required per cycle.
In service a mechanical meter accurately monitors water usage. This feature eliminates the costly
wasted capacity due to premature regenerations.
Vacation Periods
There is no need to be concerned about disconnections or adjustments on your Model IQ Water
Conditioner before leaving your home for long periods of time. When no water is being used, the
"brain" will simply remain idle for that period of time and be ready to monitor water usage when you
return home.
High Usage Demand/Weekend Guests
The Model IQ Water Conditioner's "brain" will automatically recognize the increase in water usage
and regenerate before running out of conditioner water. Unpredictable water demand is never a
problem with the Ionics Model IQ.
How To Set The Time Of Day
If you should have a power failure or want to adjust for Daylight Saving Time, follow these
Instructions.
Press and hold in the red button to disengage the drive gear.
Turn the large gear until the actual time of day is opposite the time of day pointer.
Release the red button to engage the drive gear.
To Next Page
Loading...