To Next PageTo Next Page
Need help?Do you have a question about the IPC PW-H100 Syncron-H and is the answer not in the manual?
Instructions for attaching the high pressure lance to the machine.
Connecting the water supply hose to the cleaner's inlet.
Connecting the cleaner to the mains power supply.
Defines risk categories: Danger, Warning, Information for user safety.
Details the cleaner's classification for electric shock protection and safety features.
Lists incorrect uses like washing people, animals, or using wrong chemicals.
Check for damage after unpacking and fit separate parts as instructed.
Details the location and importance of the data plate for machine specs.
Protects user and appliance. Must not be tampered with.
Advised procedure for first-time start to remove air/impurities from water circuit.
Select low or high pressure jet using the gun position.
Turn thermostat to steam position. Observe safety precautions.
Use recommended detergents. Dilute correctly and consider environmental impact.
Steps for applying detergent, rinsing, and flushing the circuit afterwards.
Step-by-step guide for applying antifreeze to protect the hydraulic circuit.
Check oil level and perform oil changes as per schedule for pump longevity.
Procedure for cleaning or replacing fuel filter and cleaning the fuel tank.
Regularly clean the water intake filter to remove impurities.
Tasks like cable checks, filters, oil changes at specified intervals.
General| Brand | IPC |
|---|---|
| Model | PW-H100 Syncron-H |
| Category | Pressure Washer |
| Language | English |
