English
- 26 -
IMPORTANT:
For maintenance and/or repairs, use only original spare parts which offer the greatest characteristics of quality and
reliability. Failure to use original spare parts frees the manufacturer from all responsibility.
FAULTS
Indicator light "G" (g. 7) ashes.
Water leaks from head.
Presence of water in oil.
CAUSES
No water softener.
Gasket worn.
Oil seal rings worn.
REMEDIES
Fill the tank with water softener.
Apply to our technical service centre.
Apply to our technical service centre.
N.B. To reset the indicators on the control panel, rotate the main switch “A” (g. 7) to the “O” position and then to the
“I” position.
To Next Page
Loading...
