Ipcamdata iSmartViewPlus User Manual

connecons
Connect to network
Quick Installaon Guide
Tips:
This is Quick Installaon Guide, for more detailed instrucon,
please download it by this link:
hp://cd.ipcamdata.com .
Camera ID & QR Code label
X Series IP Camera
Username: admin
Password: 123456
DID: VIEW-XXXXXX-CEOWH
DDNS: xxxxxxx.nwsvr1.com
iSmartViewPro icon
2. Click on "Add Camera via WiFi mode".
2
X Series IP Camera
Username: admin
Password: 123456
DID: VIEW-XXXXXX-CEOWH
DDNS: xxxxxxx.nwsvr1.com
This is the Quick Installaon Guide, for more detailed manual,
please download it from this link: hp://cd.ipcamdata.com.
• Plug the camera in with the included power supply
• Connect your phone to your WiFi
• Connect the camera to your wifi router with ethernet cable
Tips:
• We suggest you to use the included power supply to
avoid any damage of the camera.
•You can find the camera ID and QR code in the label on
the camera.
X Series IP Camera Username: admin Password: 123456 DID: VIEW-XXXXXX-CEOWH DDNS: xxxxxxx.nwsvr1.com
OUT IN
RESET
Power adapter
ADSL
Router
IP camera
1.Go to the Google Play to search and download,if you are
Andriod “iSmartViewPro” APP to your smart phone or tablet.
VIEW-XXXXXX-CEOWH
QR Code
2) Your WiFi name is input already (if this WiFi is not
what you want to connect it to, please tap to switch to
other WiFi. But please note the wifi you are connecng to
should be the 2.4GHz wifi), and input the correct WiFi
Password (Wi-Fi name and Password should not contain
special characters ' and &) and click “ Connect to WiFi".
And hold your phone close to the camera and turn up the
phone volume, then click on“Next” and "Start".
Status LED
Download APP (Android)
3
1. Click on "Add Camera".
1) Please check the blue light on the camera, if it is flashing
slowly, please tap “Blue ligh t is flashing slowly”, and Scan the
1
QR code in the label on the camera, and name the camera.
Then click on “Next” (Please don't change the user name and
password here, please use the default one "admin"and
"123456")
wifi
wifi
Blinking SlowlySolid Light Blinking Quickly
Status LED
2.Or scan below QR code to get the APP.
iSmartViewPro
(Anadroid)
iSmartViewPlus
(ios)
Factory Default Accout Info
Camera ID(DID)
DDNS
QR Code
iSmartViewPro
iSmartViewPlus
Quick Installation Guide
1. connecons
2. Download APP
3. Connect to network

Ipcamdata iSmartViewPlus Specifications

General

Night Vision	Yes
Two-way Audio	Yes
Motion Detection	Yes
Power Supply	DC 5V/1A
Connectivity	Wi-Fi
Pan and Tilt	Yes
Local Storage	MicroSD card (up to 128GB)
Lens	3.6mm
Night Vision Range	Up to 10 meters
Operating Temperature	-10°C to 45°C

Summary

Connections

Camera ID and QR Code Label

Location of the camera's unique ID and QR code for setup.

Download App

Download Android App

Instructions for downloading the iSmartViewPro application for Android devices.

Download iOS App

Instructions for downloading the iSmartViewPlus application for iOS devices.

Connect to Network

Add Camera via WiFi Mode

Initiates the camera addition process using WiFi connection mode.

WiFi Connection Configuration

Details on configuring WiFi settings, including password and volume.

Troubleshooting Network Connection

Information on resolving connection issues and resetting the device.