Ipevo Uplift - User Manual

To Next Page

IPEVD

www.ipevo.com

IPEVO Uplift

Multi-angle Arm for Smartphones

Quick Start Guide

Customer Service

Email: cs@ipevo.com

Tel: +1-408-490-3085 (USA)

What is IPEVO Uplift

IPEVO Uplift is the ultimate tool for those who choose to use their smartphone as a document

camera or a webcam. Place your phone into the Uplift’s holder and have it become your table-top

camera which integrates the capabilities of webcams and of document cameras. Uplift aims to

enhance your distance communication experience and this guide will help you set it up.

Placing your smartphone into the holder

The rst step is to insert the phone into the smartphone holder, which is located at the end of the

Uplift’s multi-jointed arm. To do that, please use the edge of your phone to support one of the

clamps and carefully pull the other clamp in the opposite direction with your free hand. When the

distance between the clamps is sucient, please insert your phone carefully. The camera of your

phone should not be obstructed by the Uplift’s body and should be facing away from the Uplift’s

body.

Uplift can accommodate smartphones with a width ranging between 2.7 - 3.8 Inch (70 - 98mm).

Need help?

Do you have a question about the Ipevo Uplift and is the answer not in the manual?

Summary

Uplift supports phones up to 0.66 lbs (300g). For downward camera use, joint 2 at 90° is recommended; check weight if tilting.

General