21
6
E9 (motor protection)
The thermo-magnetic protection was activated 5 times.
EA (tilt)
The tilt switch was activated 15 times during final spin and the final spin was
therefore skipped.
Eb (tilt switch)
The tilt switch is blocked.
Remark
When a malfunction occurs during a program, the central display will
communicate the appropriate error message at the end of the cycle. When
this malfunction has been removed and a new program has been
selected, this error message also disappears.
When malfunctions E6, E7, E9 or Eb are detected at the start of the wash
cycle, the program will not be started and the error message will remain
on the display.
Mot 2 ( rotation sensor)
The speed detection is not operating properly. The speed meter is probably out
of order or disconnected.
To Next Page
Loading...
