Need help?Do you have a question about the IPSO HC135 and is the answer not in the manual?
Wiring instructions for single-phase and three-phase power configurations.
How to operate the machine using start button or coin/token payment.
Detailed explanation of the Time Stop and Soak functions with usage examples.
Indicates an issue with the Eprom, requiring replacement.
Machine failed to reach the appropriate water level within the specified time.
Wash bath did not reach the required temperature after the heating period.
The door lock mechanism was released unexpectedly during the wash cycle.
Water not drained sufficiently, preventing the machine from spinning properly.
The temperature sensor is likely broken or malfunctioning.
Thermo-magnetic protection activated multiple times, indicating motor issues.
Errors related to the tilt switch, potentially skipping the spin cycle.
The speed detection system is not operating correctly, affecting rotation monitoring.
To Next Page
General