IPSO WE 165 - Technical Remarks; Program Timing Details

20
5
Technical remarks
Program time (Machine with CAM-timer)
Remark
In the programs 1 & 2 the pre-wash is installable on 430" or 630" and the main wash installable
on 7' or 12',according to the cabling.
Code 10.1126 - 220 V (50Hz with brown CAM-timer)
There are several possibilities according to cabling, microprocessor, type of heating, tempe-
rature control, water level control, etc.... For your information you can find the details of the
programs for a machine with standard programs, boiler fed (without temperature control nor
water level controls).
12 3 45
Hot Warm Synth. 1 Synth. 2 Wool
water inlet cold+warm cold+warm cold+warm cold+warm cold
pre-wash 630" 630" 430" 630" 630"
water drain 30" 30" 30" 30" 30"
spin 1' 1' 1' ----- -----
water inlet warm 33% cold+ 50%cold+ ----- -----
66% warm 50%warm
main wash 12' 12' 9' ----- -----
water drain 30" 30" 30" ----- -----
water inlet cold cold cold cold cold
rinse1 2' 2' 2' 2' 2'
water drain 30" 30" 30" 30" 30"
spin 1' 1' ----- ----- -----
water inlet cold cold cold cold cold
rinse 22'2'2'2'
water drain 30" 30" 30" 30" 30"
spin 1' 1' ----- ----- -----
water inlet cold cold cold cold cold
rinse 3 230" 230" 230" 230" 230"
water drain 30" 30" 30" 30" 30"
spin 3' 3' 1'30" 1'30" 1'30"
delay 30" 30" 30" 30" 30"
tumble 30" 30" 30" 30" 30"
total 3430" 3430" 26 15'30" 15'30"