01 x 1
02 x 2
03 x 2
LED 4W
Instruction Manual -
Battery-operated Motion Sensing LED Twin Spot Light
Customer service number:
For problems or questions,
please call us at 1-800-296-1869
Please retain this instruction manual for future
reference
Installation
- Mounting with screws
2. Remove rubber plugs.
3. Mark holes for mounting with screws.
6. Attach the device to the back cover.
1. Remove mounting plate.
IQ America One Year Warranty
This is a “Limited Warranty” which gives you specific
legal rights. You may also have other rights which vary
from state to state and province to province.
For a period of one year from the date of purchase,
any malfunction caused by factory defective parts or
workmanship will be corrected at no charge to you. To
obtain a refund or a replacement, return the product to
the place of purchase.
NOT COVERED: Repair service, adjustment and
calibration due to misuse, abuse or negligence.
Unauthorized service or modification of the product or of
any furnished component will void this warranty. This
warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use or
unauthorized service.
This warranty covers only IQ America products and
is not extended to other equipment and components
that a customer uses in conjunction with our products.
This warranty is expressly in lieu of all other
warranties, express or implied, including any warranty,
representation or condition of merchant ability of that
the products are fit for any particular purpose or use,
and specifically in lieu of all special, indirect or incidental
or consequential damages.
Repair or replacement shall be the sole remedy of
the customer and there shall be no liability on the part of
IQ America for any special, indirect, incidental or
consequential damages, including but not limited to any
loss of business or profit, whether or not foreseeable.
Some states or provinces do not allow the exclusion or
limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
Retain receipt for warranty claims.
Control Settings
Light level adjustmentOperation selector switch
Adjust the LED floodlight to the
desired position.
4. Attach the back cover.
5. Install 4 x “C” batteries.
LED Floodlight adjustment
The "Light on" time: about 10 seconds
0715E1
Made in China
Battery Caution & Disposal Information:
1. Do not mix old and new batteries.
2. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable
(Nickel Cadmium) or (Nickel Metal Hydride) batteries.
3. Do not dispose of batteries in fire.
4. Batteries should be recycled or disposed of as per state and
local guidelines.
Motion Detection Adjustment
Selector Switches
Symbols Symbols
Motion Sensing Range
up to 8 meters / 26.2 ft.
Click!
- OFF
- Motion Detector Mode (LED is
switched on when movement is
detected)
- Alert mode (LED flashes when
movement is detected)
- Works only at night
- Works day and night
in any light setting
45°
30° 30°
EN
LB-1403-WH
LB-1403-BZ
To Next Page
Need help?
General