Need help?Do you have a question about the Iqinvision IQeye and is the answer not in the manual?
General| Brand | Iqinvision |
|---|---|
| Model | IQeye |
| Category | Security Camera |
| Language | English |
Outlines the essential steps for making the IQeye camera operational: Ethernet, power, and IP address.
Guide to adjusting camera settings via web browser interface, including step-by-step instructions.
Methods for assigning an IP address: VisiCon utility or directed ping packet.
Step-by-step guide to assigning a static IP address using the VisiCon software.
Procedure for assigning an IP address using a directed ping packet and Telnet.
Guides users through the browser-based installation wizard for initial camera settings.
How to focus the camera using the live image feedback in the installation wizard.
Fine-tuning image quality with settings like lighting, brightness, contrast, and compression.
Configuring server settings like camera name, TCP/IP gateway, and time zone.
Steps to access the camera's live images and configuration pages via a web browser.
Fine-tuning image quality with settings like lighting, brightness, contrast, and compression.
Customizing image size and characteristics using Hotspot, Crop, and Exposure tools.
Using the Focusing Aid page for adjusting camera focus with live image feedback.
Setting up general and management (superuser) passwords for security.
Enables password protection for viewing camera images.
Enables password protection for adjusting camera settings.
Settings for configuring trigger events, including FTP and email notifications.
Configuring the camera to send e-mail notifications with images upon trigger events.
Using the 'Trigger Now' link to test e-mail sending functionality.
Configuring FTP for saving and organizing trigger event images on a remote server.
Using 'Trigger Now' to test FTP transfer to a remote server.
Steps to connect a compatible modem and configure dial-up settings.
Setting incoming password, idletime, dial-out gateway, and PPP username.
Steps to install and use VisiCon to manage IQeye cameras.
Guide to downloading and installing new software via VisiCon.
Using VisiCon to reboot the camera or reset it to factory defaults.
Checks for common problems like physical connections and IP address conflicts.
Resolving issues related to power supply and status LED behavior.
Resolving problems like camera access, blank images, and image quality.
Methods for loading updated software onto the camera via FTP, TFTP, or MOP.
To Next Page