The SL-A38 Massage Chair is a sophisticated device designed to provide a comprehensive and relaxing massage experience. It incorporates advanced technology and a user-friendly interface to cater to various massage needs and preferences.
Function Description
The massage chair is equipped with a set of vertically movable, four-wheel driven muted intelligent massage heads. It offers a wide range of massage methods, including shiatsu, kneading, flapping, knocking, simultaneous kneading, and flapping. The chair features automatic shoulder detection and location, ensuring that the massage is tailored to the user's body.
It provides a characterized auto massage experience with six kinds of automatic programs:
- Deeply massage on acupressure points, effectively alleviate pain (Auto F1): Targets specific acupressure points to relieve pain.
- Loosen body physique (Auto F2): Helps to relax and loosen the entire body.
- Promote blood circulation (Auto F3): Enhances blood flow throughout the body.
- Fast to experience all the massage effect (press for 2S, switch to speed press) (Auto F0): Offers a quick and comprehensive massage experience.
- Massage focus on upper body (Auto F4): Concentrates massage on the upper body.
- Massage focus on lower body (Auto F5): Focuses massage on the lower body.
The chair also offers manual massage options for the upper body, allowing users to customize their experience:
- Shiatsu: Provides a deep, penetrating massage.
- Knead&Flap: Combines kneading and flapping motions.
- Speed: Adjusts the speed of the massage.
- Flap: Delivers a rhythmic tapping massage.
- Knead: Offers a circular, kneading motion.
- Knock: Provides a percussive, knocking massage.
Users can adjust the width of the massage with three grades (narrow, medium, and wide) and the speed with three grades.
For the lower body, the chair features a sole roller with three speed levels available. It also incorporates far infrared back heating, which warms the body within 3 minutes, enhancing relaxation.
The SL-A38 includes an air pressure massage function with three modes: full body air pressure, arms (upper arm set with 8 airbags, arm set with 8 airbags), leg set with 16 airbags, and three intensity options. This feature helps to relieve muscle tension and promote circulation.
A unique feature is the leg rest massage function at the bottom of the foot, with two pairs of papillae on the toe root rotating massage, and on the arch and heel, mastoid skin scraping massage. This targets specific reflexology points for enhanced relaxation.
The back heating function utilizes carbon fiber far infrared heat source, providing gentle warmth to the back. The armrest side configuration blue LED colorful artistic lamp adds to the aesthetic appeal. The backrest frame allows for different body height adjustments, and the backrest frame sliding, adjusting, and automatic lay down mode adjustment function provides maximum space saving. The L-shape back track fitting curves of the body ensures the zero gravity when back down.
Important Technical Specifications
- Model: SL-A38
- Rated voltage: 110-120V~ 60Hz or 220-240V~ 50Hz/60Hz
- Rated power input: 150W
- Rated time: 20Min
- Safety structure: Class I
- Material introduction: PVC, PA, steel parts and electric &electron parts
- Material: PU, Leather, Cloth, Wood
Usage Features
The chair is controlled via an intuitive remote control with a clear display.
- Power On/Off: The power switch is located on the back of the chair.
- Start Massage: Press the power button to start the massage. The chair automatically reclines, and the shoulder position and massage acupressure point detection begin.
- Shoulder Position Adjustment: If there is a difference between the massage balls and the actual shoulder position, users can move the massage balls upward or downward to a suitable position. The shoulder position has 10 grades adjustable, and it will run automatic massage if there is no adjustment within 10 seconds.
- Memory Function: The chair allows users to save their preferred massage settings. Pressing "Upper body / M1" or "Lower body / M2" for 3 seconds enters the memory massage function.
- Calf Rise and Drop: Buttons are available to control the calf rest lifting and dropping, allowing users to stop or release the movement.
- Backrest Rise and Drop: Similar to the calf rest, buttons control the backrest lifting and dropping.
- Auto Lay Down Mode: A dedicated button initiates a three-modes circulation function, putting the chair into auto lay down mode.
Maintenance Features
- Cleaning: Use a wet cloth to clean the electric parts such as the switch and plug. Avoid using strong detergents or chemicals.
- Storage: When not in use, the product should be stored in a dry and dustless environment, away from direct sunlight and high temperatures.
- Disassembly and Assembly:
- Armrest Removal: Unscrew the screws on the front-end of the armrest and the back-end of the armrest. Gently pull forward the back-end of the armrest to pull out the decoration cover, then lift up the back-end of armrest to pull out the buckle. Unplug the joint of upper armrest air pipe.
- Armrest Installation: Connect the air pipe on the back-end of the armrest to the upper arm's. Put the air pipe and power cord into the steel frame. Hook the back-end of armrest on the steel frame. Insert the back-end of armrest into the decoration cover of upper arm. Hook the front-end of armrest on the steel frame and lock the buckle. Gently push the armrest down, double check if the hook is well locked. Put the plastic block between the armrest and calf rest pothook, then tighten the up & down screws. Tighten the screws on the back-end of armrest.
- Calf Installation: Install the rotating shaft incalf fixed axis first, then the R shape pin assembly. After calf is connected with the fixed axis aligned, insert it. Plug the R pin, then move to the other side of the calf, and plug the R pin.
- Pillow and Backrest Pad Dis/mounting: Using pillows can reduce the kneading massage intensity on shoulder and neck. The backrest cushion and backrest connected by zipper and head cushion and backrest pad connected by thread gluing.
- Floor Protection: Place a carpet or other object to avoid damage to the floor during movement. Do not move the chairs with its wheels on wood floor, rough ground or in anarrow space. Two people are required to lift the chair. During the lifting period, the windscreen and backrest cover grooves as the focal point.
Safety Precautions
- Always read the manual carefully before operation.
- Do not allow children to touch movable parts of the product.
- Ensure the power supply is well-grounded and matches the product specifications.
- Do not use the product in wet or humid environments.
- Avoid using the product if you feel unwell, are pregnant, have a pacemaker, or have certain medical conditions.
- Do not use the product for more than 20 minutes at a time.
- Unplug the power cord after use and before cleaning.
- If the supply cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
- Do not attempt to repair the product yourself.
- Ensure the product is placed on a stable, level surface.
- Do not pull or push the product above uneven ground.
- Do not use the product if the surface temperature is hot, as this may indicate a malfunction.
Need help?
To Next Page
General
